# Browse by Subject "Engineering, Mechanical"

• (1993)
The objective of this work is to develop a general cutting process model for high-speed machining (HSM) that can predict the optimum cutting conditions which result in high productivity rates, small workpiece surface error, ...

application/pdf

PDF (14Mb)
• (1995)
The local and global bifurcation behavior of various structural and mechanical systems have been examined in detail. The analysis is divided into three main parts. In the first part, global bifurcation analysis is performed ...

application/pdf

PDF (12Mb)
• (1980)
The variation of the thermal properties with temperature complicates the analysis of transient heat conduction problems because the governing partial differential equations are nonlinear. The analytical situation in some ...

application/pdf

PDF (20Mb)
• (1978)

application/pdf

PDF (4Mb)
• (1977)

application/pdf

PDF (3Mb)
• (1985)
Ability to predict the scenario following a loss-of-coolant accident (LOCA) is of central importance in the safety analysis of water reactors. During LOCA, the reactor core is uncovered and the residual water inventory is ...

application/pdf

PDF (9Mb)
• (1995)
Radiant heating systems have been identified by segments of the HVAC industry as technology which can potentially reduce the energy consumption of buildings. As a result of higher mean radiant temperatures within radiantly ...

application/pdf

PDF (7Mb)
• (1964)

application/pdf

PDF (3Mb)
• (1995)
This study is the first to model and experimentally validate refrigerant inventory of R134a in small-channel cross-flow condensers$\sp\dagger.$ This heat exchanger is used in automotive applications and uses smaller internal ...

application/pdf

PDF (10Mb)
• (1994)
An experimental study of heat transfer and flow regimes during condensation of refrigerants in horizontal tubes was conducted. Measurements were made in smooth, round tubes with diameters ranging from 3.14 mm to 7.04 mm. ...

application/pdf

PDF (14Mb)
• (1956)

application/pdf

PDF (2Mb)
• (1992)
A numerical study was undertaken to clarify the mechanisms of heat transfer in fluid-particle suspension flows. Such flows, including fluidization, are of considerable industrial importance. The present research focuses ...

application/pdf

PDF (7Mb)
• (1994)
An experimental study of flow boiling heat transfer of refrigerants in a horizontal-tube evaporator was conducted. Measurements were made in several instrumented, horizontal copper tubes with inside tube diameters ranging ...

application/pdf

PDF (10Mb)
• (1980)
This thesis consists of two parts. In the first part of the thesis, effective thermal conductivities of neutrally buoyant, concentrated polyethylene suspensions in silicone oil and kerosene mixture, and polystyrene suspensions ...

application/pdf

PDF (5Mb)
• (1974)

application/pdf

PDF (3Mb)
• (1977)

application/pdf

PDF (6Mb)
• (1994)
Though simulation models are extensively used for detailed design analysis, their potential benefits for supporting early-stage design have not yet been harvested. This thesis presents a new design methodology, called ...

application/pdf

PDF (8Mb)
• (1996)
This study presents new comprehensive nonlinear structural modeling approaches using hierarchical 3D micromechanical models for the analysis of progressive damage in laminated structures. Each approach is generally a ...

application/pdf

PDF (9Mb)
• (1995)
Fatigue and creep deformation behavior of a commercial grade of alumina with 6 wt % of grain boundary viscous phase was investigated. Two failure mechanisms were observed at 1000 C under static loading. At high stresses, ...

application/pdf

PDF (6Mb)
• (1989)
The growth and characterization of epitaxial indium gallium arsenide phosphide compound semiconductor films are described. Methods have been developed to improve the purity of both InP and GaAs and to better assess the ...

application/pdf

PDF (3Mb)