Browse by Author "Ozer, Hasan"

  • Al-Qadi, Imad L.; Salinas Cortina, Alejandro; Hasiba, Khaled I.; Ozer, Hasan; Leng, Zhen; Mahmoud, Enad; Parish, Derek C.; Worsfold, Stephen J. (2012-07)
    Interface bonding between pavement layers is a key factor affecting the performance of any pavement structure. Over the years, several studies have been performed to better understand bonding between pavement layers. The ...

    application/pdf

    application/pdfPDF (5Mb)
  • Al-Qadi, Imad L.; Hasiba, Khaled I.; Salinas Cortina, Alejandro; Ozer, Hasan; Leng, Zhen; Parish, Derek C.; Worsfold, Stephen J. (2012-07)
    Tack coat is a light layer of diluted asphalt that is applied to hot mix asphalt concrete (HMA) or Portland cement concrete (PCC) pavement surfaces to ensure good interface bonding between layers. Interface bonding is ...

    application/pdf

    application/pdfPDF (2Mb)
  • Al-Qadi, Imad L.; Carpenter, Samuel H.; Roberts, Geoff; Ozer, Hasan; Aurangzeb, Qazi; Elseifi, Mostafa; Trepanier, James (Illinois Center for Transportation (ICT), 2009-01)
    For current recycled mix designs, the Illinois Department of Transportation (IDOT) assumes 100% contribution of working binder from Recycled Asphalt Pavement (RAP) materials when added to Hot Mix Asphalt (HMA). However, ...

    application/pdf

    application/pdfPDF (5Mb)
  • Ozer, Hasan (2011-05-25)
    Layered elastic theories and finite element method are among the most familiar and practiced mechanistic approaches. These approaches succeed to a certain extent in the analysis of classical bottom-up fatigue cracking of ...

    application/pdf

    application/pdfPDF (16Mb)
  • Ozer, Hasan; Al-Qadi, Imad L.; Kanaan, Ahmad (2012-10)
    This study investigated the effect of high asphalt binder replacement for a low N-design asphalt mixture including RAP and RAS on performance indicators such as permanent deformation, fracture, fatigue potentials, ...

    application/pdf

    application/pdfPDF (3Mb)
  • Tutumluer, Erol; Ozer, Hasan; Hou, Wenting; Mwumvaneza, Vincent (Illinois Center for Transportation/Illinois Department of Transportation, 2015-06)
    Increased emphasis in the construction industry on sustainability and recycling requires production of aggregate gradations with lower dust (cleaner aggregates) and smaller maximum sizes—hence, increased amount of quarry ...

    application/pdf

    application/pdfPDF (7Mb)
  • Al-Qadi, Imad L.; Carpenter, Samuel H.; Leng, Zhen; Ozer, Hasan; Trepanier, James (Illinois Center for Transportation (ICT), 2009-02)
    Interface bonding between hot-mix asphalt (HMA) overlays and Portland cement concrete (PCC) pavements is one of the most significant factors affecting overlay service life. This study was performed to quantify the effects ...

    application/pdf

    application/pdfPDF (4Mb)
  • Al-Qadi, Imad L.; Carpenter, Samuel H.; Leng, Zhen; Ozer, Hasan; Trepanier, James (Illinois Center for Transportation, 2008-09)
    Interface bonding between hot-mix asphalt (HMA) overlays and Portland cement concrete (PCC) pavements can be one of the most significant factors affecting overlay service life. Various factors may affect the bonding ...

    application/pdf

    application/pdfPDF (973Kb)