Browse by Subject "compressor"

  • Glabbeek, W.H. Van; Sheiretov, T.K.; Cusano, C. (Air Conditioning and Refrigeration Center. College of Engineering. University of Illinois at Urbana-Champaign., 1994-11)
    The effect of water dissolved in polyalkylene glycol and polyolester oils on the tribological behavior of two material contact pairs in three test environments is evaluated. The material contact pairs are M2 tool steel ...

    application/pdf

    application/pdfPDF (7Mb)
  • Yoon, H.K.; Cusano, C. (Air Conditioning and Refrigeration Center. College of Engineering. University of Illinois at Urbana-Champaign., 1999-01)
    A few among many otherwise highly successful lubricated sliding components fail catastrophically and without warning. This sudden mode of failure is often called scuffing. The phenomenon of scuffing has been known for ...

    application/pdf

    application/pdfPDF (20Mb)
  • Kim, M.H.; Bullard, C.W. (Air Conditioning and Refrigeration Center. College of Engineering. University of Illinois at Urbana-Champaign., 2001-03)
    A simple semi-empirical model for small rolling-piston-type rotary compressors using the most potential alternative refrigerants R-410A and R-407C including R-22 has been developed based on thermodynamic principles and ...

    application/pdf

    application/pdfPDF (410Kb)
  • Sheiretov, T.K.; Van Glabbeek, W.; Cusano, C. (Air Conditioning and Refrigeration Center. College of Engineering. University of Illinois at Urbana-Champaign., 1992-12)

    application/pdf

    application/pdfPDF (2Mb)
  • Sheiretov, T.K.; Cusano, C. (Air Conditioning and Refrigeration Center. College of Engineering. University of Illinois at Urbana-Champaign., 1993-07)

    application/pdf

    application/pdfPDF (14Mb)
  • Davis, B.; Cusano, C. (Air Conditioning and Refrigeration Center. College of Engineering. University of Illinois at Urbana-Champaign., 1992-05)
    The tribological characteristics of the most common contact geometries found in compressors of air conditioning and refrigeration systems have been experimentally investigated by means of a unique high pressure tribometer ...

    application/pdf

    application/pdfPDF (6Mb)
  • Davis, B.; Sheiretov, T.K.; Cusano, C. (Air Conditioning and Refrigeration Center. College of Engineering. University of Illinois at Urbana-Champaign., 1992-03)
    The tribological characteristics of the most common contact geometries found in compressors of air conditioning and refrigeration systems have been experimentally investigated by means of a unique high pressure tribometer ...

    application/pdf

    application/pdfPDF (1Mb)
  • Sheiretov, T.K.; Yoon, H.; Cusano, C. (Air Conditioning and Refrigeration Center. College of Engineering. University of Illinois at Urbana-Champaign., 1996-01)
    The tribological characteristics of various aluminum alloys, aluminum composites and some surface treated aluminum are evaluated in lubricant/refrigerant mixtures. All of these evaluations are based upon a specimen testing ...

    application/pdf

    application/pdfPDF (5Mb)
  • Yeo, Seung Min (2013-05-24)
    To meet the higher performance requirements of today’s air-conditioning and refrigeration (ACR) compressors, their operating conditions have been getting harsher under higher speed and load, thus making tribological ...

    application/pdf

    application/pdfPDF (15Mb)