Files in this item



application/pdfTAM111-UILU-ENG-67-408.pdf (19MB)
(no description provided)PDF


Title:X ray stress study of non homogeneous yielding in low carbon steel
Author(s):Steele, M.C.; Eichberger, L.C.
Subject(s):Stress Study
Non-homogeneous Yielding
Steel Cylinders
Abstract:A mild steel thick-walled cylinder was overstrained by internal pressure. The non-homogeneous yielding produced a residual stress pattern on removal of pressure. X-ray stress analysis was used to examine the residual stress distribution on an end face of the cylinder. The results were difficult to interpret owing to the severity of cylinder end effects, and the limitations on accuracy of X-ray stress analysis. In general, the residual stress distribution corroborated the expected lack of axial symmetry. A region of comparatively high shear stress existed in advance of the tips of Lueders’ lines.
Issue Date:1956-12
Publisher:Department of Theoretical and Applied Mechanics. College of Engineering. University of Illinois at Urbana-Champaign
Series/Report:TAM R 111
Genre:Technical Report
Sponsor:Office of Ordnance Research, Ordnance Corps, Department of the Army, Contract No. DA-11-022-ORD-1527, ORD Project TB2-0001(1070)
Rights Information:Copyright 1956 Board of Trustees of the University of Illinois
Date Available in IDEALS:2021-11-04

This item appears in the following Collection(s)

  • Technical Reports - Theoretical and Applied Mechanics (TAM)
    TAM technical reports include manuscripts intended for publication, theses judged to have general interest, notes prepared for short courses, symposia compiled from outstanding undergraduate projects, and reports prepared for research-sponsoring agencies.

Item Statistics