Files in this item

FilesDescriptionFormat

application/pdf

application/pdfTAM308-UILU-ENG-68-0096.pdf (16MB)
(no description provided)PDF

Description

Title:Low cycle fatigue properties of ausformed steel
Author(s):Matheny, J.E., Jr.
Subject(s):Fatigue Properties
Steel
Abstract:Low cycle fatigue data are reported for an ausformed AISI type H-11 steel. Tensile and fatigue properties of the ausformed steel are compared with those of quenched and tempered SAE 1045 steel of comparable hardness. A small amount of cyclic strain hardening occurs in tension accompanied by a decrease in the strain hardening exponent. This result is unexpected since the initial monotonic strain hardening is only 0.070 which for most metals, indicates that cyclic softening is likely to take place. Compressive yield strength of the ausformed H-11 is higher than its tensile yield strength and the fatigue resistance of the ausformed H-11 is higher at all lives than that of SAE 1045 steel at a comparable hardness.
Issue Date:1968-02
Publisher:Department of Theoretical and Applied Mechanics. College of Engineering. University of Illinois at Urbana-Champaign
Series/Report:TAM R 308
1968-0096
Genre:Technical Report
Type:Text
Language:English
URI:http://hdl.handle.net/2142/112033
ISSN:0073-5264
Sponsor:Caterpillar Tractor Company; LaSalle Steel Company; United States Steel Corporation
Rights Information:Copyright 1968 Board of Trustees of the University of Illinois
Date Available in IDEALS:2021-11-04


This item appears in the following Collection(s)

  • Technical Reports - Theoretical and Applied Mechanics (TAM)
    TAM technical reports include manuscripts intended for publication, theses judged to have general interest, notes prepared for short courses, symposia compiled from outstanding undergraduate projects, and reports prepared for research-sponsoring agencies.

Item Statistics