Files in this item

FilesDescriptionFormat

application/pdf

application/pdfTAM322-UILU-ENG-69-151.pdf (3MB)
(no description provided)PDF

Description

Title:Experimental evaluation of plasticity theories for anisotropic metals
Author(s):Frederking, R.M.W.; Sidebottom, O.M.
Subject(s):Plasticity
Anisotropic Metals
Abstract:An experimental investigation was undertaken to evaluate anisotropic plasticity theories which have been proposed in the literature. Three different metals in the form of 2.5 in. diameter bars were considered: SAE 1020 steel preloaded in tension to a strain of 8 percent, copper alloy 360 (free cutting brass) preloaded in tension to a strain of 3 percent, and 2024-T351 aluminum alloy was received. All metals had approximately the same properties in the radial and circumferential directions with greatly different properties in the axial direction. Tension and compression tests were conducted on specimens having directions of axial, circumferential and 45° to the axis. Hollow torsion tests were conducted on axial specimens. Biaxial tests were conducted on thin-walled cylinders. All loading was monotonic and proportionate and extended well into the plastic region. The various anisotropic plasticity theories were evaluated by comparing theoretical and experimental yield curves for each material and by comparing theoretical load-deformation curves with experimentally determined curves for tension and compression specimens at 45° to the axis, for hollow torsion specimens, and for biaxial loading. In most cases good agreement was found between theory and experiment.
Issue Date:1969-04
Publisher:Department of Theoretical and Applied Mechanics. College of Engineering. University of Illinois at Urbana-Champaign
Series/Report:TAM R 322
1969-0151
Genre:Technical Report
Type:Text
Language:English
URI:http://hdl.handle.net/2142/112047
ISSN:0073-5264
Rights Information:Copyright 1969 Board of Trustees of the University of Illinois
Date Available in IDEALS:2021-11-04


This item appears in the following Collection(s)

  • Technical Reports - Theoretical and Applied Mechanics (TAM)
    TAM technical reports include manuscripts intended for publication, theses judged to have general interest, notes prepared for short courses, symposia compiled from outstanding undergraduate projects, and reports prepared for research-sponsoring agencies.

Item Statistics