Files in this item

FilesDescriptionFormat

application/pdf

application/pdfTAM101-UILU-ENG-67-397.pdf (41MB)
(no description provided)PDF

Description

Title:Overstraining of alloy steel thick walled cylinders
Author(s):Eichberger, L.C.; Steele, M.C.
Subject(s):Overstraining
Alloy-steel
Cylinders
Abstract:Experimental results are presented on the behavior of four alloy-steel cylinders (5 in. OD x 3 in. ID x 8 in. long) overstrained by internal pressure. Particular attention is given to the mechanism of yielding and the associated strains measured at various locations on the bore and outside surfaces. The behavior of the alloy steel cylinders is qualitatively the same as the previously reported mild steel and medium-carbon steel cylinders. The degree of non-homogeneity present in the cylinder tests is shown to be dependent on a material property taken from tension tests. Average bore and outside circumferential strains compare favorably with Koiter’s theory. Axial strains are essentially elastic which is also in keeping with Koiter’s theory. Circumferential strains exhibit significant creep.
Issue Date:1956-06
Publisher:Department of Theoretical and Applied Mechanics. College of Engineering. University of Illinois at Urbana-Champaign
Series/Report:TAM R 101
1967-0397
Genre:Technical Report
Type:Text
Language:English
URI:http://hdl.handle.net/2142/112704
ISSN:0073-5264
Sponsor:Office of Ordnance Research, Ordnance Corps, Department of the Army, Contract No. DA-11-022-ORD-1527, ORD Project TB2-0001(1070)
Rights Information:Copyright 1956 Board of Trustees of the University of Illinois
Date Available in IDEALS:2021-11-04


This item appears in the following Collection(s)

  • Technical Reports - Theoretical and Applied Mechanics (TAM)
    TAM technical reports include manuscripts intended for publication, theses judged to have general interest, notes prepared for short courses, symposia compiled from outstanding undergraduate projects, and reports prepared for research-sponsoring agencies.

Item Statistics