 IDEALS Home
 →
 College of Engineering
 →
 Dept. of Theoretical and Applied Mechanics (19262006)
 →
 Browse Dept. of Theoretical and Applied Mechanics (19262006) by Title
Browse Dept. of Theoretical and Applied Mechanics (19262006) by Title
Now showing items 154173 of 528

(2002)Analysis of swelling kinetics is also possible with the assumption that the rate of swelling is proportional to the square of the amount of water that the gel has to absorb from the solution. This assumption produces a ...
application/pdf
PDF (7MB) 
application/pdf
PDF (4MB) 
application/pdf
PDF (2MB) 
(Department of Theoretical and Applied Mechanics (UIUC), 200404)The addition of liquidfilled ureaformaldehyde (UF) microcapsules to an epoxy matrix leads to significant reduction in fatigue crack growth rate and corresponding increase in fatigue life. ModeI fatigue crack propagation ...
application/pdf
PDF (1MB) 
application/pdf
PDF (4MB) 
application/pdf
PDF (2MB) 
application/pdf
PDF (1MB) 
(2004)Largeeddy simulation (LES) is a promising prediction technique for turbulent flows where only the largest scales of turbulence are simulated, while the effects of the small scales are modeled. However, the application of ...
application/pdf
PDF (5MB) 
(Department of Theoretical and Applied Mechanics (UIUC), 200412)The Mechanics of Complex Materials is a tenweek undergraduate research program hosted by the Department of Theoretical and Applied Mechanics at the University of Illinois at UrbanaChampaign. The dual purposes of this ...
application/pdf
PDF (4MB) 
application/pdf
PDF (1MB) 
(1977)
application/pdf
PDF (3MB) 
(2007)Finally, the dynamic optimal finitevolume LES model is applied to more a more complex flow, the temporallygrowing shear layer. The results obtained with dynamic optimal finitevolume LES models are comparable with the ...
application/pdf
PDF (3MB) 
(2009)We consider a round jet shrouded for a finite downstream distance by a sharplyterminated concentric cylinder. As the vortical disturbances supported by a vortexsheet model of the jet pass the sharp edge of the shroud ...
application/pdf
PDF (2MB) 
(1985)A method to determine the ordinary statistical moments of time to first passage and to determine the probability of first passage failure for a simple oscillator, incorporating the modified Bouc hysteresis model, has been ...
application/pdf
PDF (4MB) 
(2006)Currently all our simulations are twodimensional. The order of the spatial accuracy of the method is analyzed with respect to both the Cartesian mesh spacing and the solid Lagrangian mesh element size. The method is ...
application/pdf
PDF (3MB) 
(1981)In Chapt. 2, a model is proposed for flammability limits based on flame stretch that is applicable to upward propagation through lean methane/air mixtures in round tube. Predictions of the model are in good agreement with ...
application/pdf
PDF (3MB) 
(2003)Finally, the flame front propagation in an adiabatic nonenergetic channel is investigated. Specifically, the interaction of the flame front with the flow inside the channel is studied and the focus is to assess the ...
application/pdf
PDF (7MB) 
(1970)
application/pdf
PDF (2MB) 
application/pdf
PDF (3MB) 
application/pdf
PDF (6MB)
Now showing items 154173 of 528