Files in this item



application/pdf1206812_75_1_19 ... ull_scale_tests_28_opt.pdf (7MB)
(no description provided)PDF


Title:Full-Scale Tests on a 28-Foot Nail-Glued Truss Design with 1 1/2" Lumber
Author(s):Percival, Donald H.
Building materials
Abstract:This report covers the testing of a 28'-0", 4/12 slope roof truss design using 1 1/2-inch lumber with a 3/8-inch nail-glued plywood gusset and splice plates. The program was a cooperative investigation between the Small Homes Council-Building Research Council, University of Illinois at Urbana-Champaign, and GBH-Way Homes, Inc., of Walnut, lllinois. The study evolved primarily from the recent changes in standard lumber sizes. Code bodies, lending agencies, designers, etc., are among those who have been requiring substantiating performance data on truss designs originally produced for 1 5/8-inch lumber and now fabricated with 1 1/2-inch lumber. The graphical methods of analysis are unreliable in calculating stresses in the nail-glued truss. The combined stresses, due to secondary bending caused by the ex-treme rigidity of the nail-glued joint, are not considered in graphical methods of analysis. The objectives of the program therefore included full-scale load tests to obtain both deflection data at design load and load-to-failure information on six randomly-selected trusses representative of those being used for the construction of homes by the sponsor. The tests were conducted on the hydraulic test floor of the Small Homes Council-Building Research Council, University of Illinois.
Issue Date:1975
Publisher:Small Homes Council - University of Illinois Urbana-Champaign
Series/Report:Research Report 75-1
Genre:Technical Report
Sponsor:GBH-Way Homes, Inc (Walnut, Illinois)
Rights Information:Copyright 1975 Board of Trustees of the University of Illinois
Date Available in IDEALS:2014-09-23

This item appears in the following Collection(s)

Item Statistics