Files in this item



application/pdf3250306.pdf (6MB)Restricted to U of Illinois
(no description provided)PDF


Title:Carbon Dioxide and R410A Flow Boiling Heat Transfer, Pressure Drop, and Flow Pattern in Horizontal Tubes at Low Temperatures
Author(s):Park, Chang Yong
Doctoral Committee Chair(s):Hrnjak, Predrag S.
Department / Program:Mechanical Engineering
Discipline:Mechanical Engineering
Degree Granting Institution:University of Illinois at Urbana-Champaign
Subject(s):Engineering, Chemical
Abstract:Carbon dioxide (CO2) has been seriously considered as an alternate refrigerant for HCFC and HFC fluids, due to the increasing interest of environmentally safe refrigerants in air-conditioning and refrigeration systems. In this study, CO2 flow boiling heat transfer coefficients and pressure drop are measured in macro-scale (6.1 and 3.5 mm) tubes at evaporation temperatures of -15 and -30°C. The measured results show that the nucleate boiling is a main heat transfer mechanism in the 6.1 mm tube and the contribution of convective boiling becomes greater with the decrease of tube diameters and the increase of mass fluxes. The surface roughness of the 6.1 and 3.5 mm tube are presented by SEM and AFM images and surface profiles, and it is shown that the rougher surface of the 6.1 mm tube can affect the flow boiling heat transfer. The CO2 heat transfer coefficients and pressure drop are measured in a mini-scale (0.89 mm) multi-ported tube at the evaporation temperature of -30°C. Also, R410A and R22 flow boiling heat transfer coefficients and pressure drop in a macro-scale (6.1 mm) tube were measured, and they are compared with CO2. This comparison presents that the CO2 flow boiling heat transfer coefficients are higher than R410A and R22 at low vapor qualities, and CO2 pressure drop is significantly lower than R410A and R22. This advantageous characteristic for CO2 could be explained by properties such as surface tension, reduced pressure, and the density ratio of liquid to vapor. The prediction of heat transfer coefficients and pressure drop was performed by general correlations and the calculation results are compared with measured values. Two-phase flow patterns were visualized for CO2 and R410A in the 6 and 3 mm glass tubes, and they are compared with the Weisman et al. and the Wojtan et al. flow pattern maps. The flow pattern maps can determine the flow patterns relatively well, except the transition from intermittent to annular flow.
Issue Date:2006
Description:192 p.
Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 2006.
Other Identifier(s):(MiAaPQ)AAI3250306
Date Available in IDEALS:2015-09-25
Date Deposited:2006

This item appears in the following Collection(s)

Item Statistics