2026-09-21T08:31:30Z https://www.ideals.illinois.edu/oai-pmh

oai:www.ideals.illinois.edu:2142/106346 2023-07-11 col_2142_5131 col_2142_8888 com_2142_5130 com_2142_8887 com_2142_234

Haran, Kiruba S. Haran, Kiruba S. Banerjee, Arijit Jin, Jianming Krein, Philip T. Yoon, Andy K. 2020-03-02T22:12:18Z 2020-03-02T22:12:18Z 2022-03-03T10:15:25Z 2019-11-18 2019-12 While electric machines have already shown impact in applications where efficiency, reliability, and cost are critical, newer applications are instigating development of next-generation, lightweight, power-dense motors. The benefit of lower weight in a motor is especially attractive when considered for aerospace applications, such as electric propulsion for aircraft. More specifically, significant reduction of weight and/or volume of the propulsor may allow placement of more batteries for increased overall energy storage capability for the aircraft, or reduction in energy needed during take-off or cruising. In fact, recent analysis has shown that hybridization of commercial aircraft could allow up to 33% reduction in fuel consumption, 55% reduction in NOx emissions at cruise, and 60% reduction in NOx emissions during landing and take-off. Furthermore, the National Aeronautics and Space Administration (NASA) has identified lightweight, low-volume electric machines as one of the key enabling technologies. This dissertation details work accomplished in the development of a 1 MW, 13 kW/kg, high-frequency electric machine design for improving specific power density for weight- and/or volume-sensitive applications. Analytical models that correspond to this topology are discussed. Slotless topology is compared to conventional slotted motor topology using the analytical models to show slotless topology's potential for high specific power at higher frequencies. Furthermore, the models are used to show the scalability of the high-frequency, slotless machine at different speeds. The results show that the topology maintains the lightweight characteristics even at lower speeds. The study is extended to include a specific aerospace application, and three possible motor-fan integrations are presented. While the benefit in specific power density is highlighted, the proposed slotless, cantilevered rotor topology is sensitive to manufacturing tolerances. Particularly, the low reactance of the motor and the slotless structure contributes to the increase in circulating current in the armature coils. The aforementioned analytical model is used to predict the imbalance in back-EMF and thus the circulating current due to the manufacturing tolerances, and a low- field rotor is constructed to verify the prediction. The experimental measurements point to shortcomings of the rotor eccentricity model in predicting the circulating current in the coils. The relationships between manufacturing tolerances in coils and circulating current are highlighted. Submission published under a 24 month embargo labeled 'U of I Access', the embargo will last until 2021-12-01 The student, Andy Yoon, accepted the attached license on 2019-11-18 at 09:42. The student, Andy Yoon, submitted this Dissertation for approval on 2019-11-18 at 09:52. This Dissertation was approved for publication on 2019-11-18 at 11:30. DSpace SAF Submission Ingestion Package generated from Vireo submission #14559 on 2020-02-28 at 17:22:11 Made available in DSpace on 2020-03-02T22:12:18Z (GMT). No. of bitstreams: 3 YOON-DISSERTATION-2019.pdf: 18720641 bytes, checksum: 52a988734dcd7965a715f7c720b7bcb5 (MD5) LICENSE.txt: 4206 bytes, checksum: 9033a6c5bbde838ddf19368ebe06a7ee (MD5) PROQUEST_LICENSE.txt: 4552 bytes, checksum: ecac8120a348d301c78659192666b4f2 (MD5) Previous issue date: 2019-11-18 Embargo set by: Seth Robbins for item 113887 Lift date: 2022-03-02T22:12:26Z Reason: Author requested U of Illinois access only (OA after 2yrs) in Vireo ETD system Embargo set by: Seth Robbins for item 113887 Lift date: 2022-03-02T22:15:21Z Reason: Author requested U of Illinois access only (OA after 2yrs) in Vireo ETD system Embargo set by: Seth Robbins for item 113887 Lift date: 2022-03-02T22:18:25Z Reason: Author requested U of Illinois access only (OA after 2yrs) in Vireo ETD system U of I Only Restriction Lifted for Item 113887 on 2022-03-03T10:15:25Z. application/pdf http://hdl.handle.net/2142/106346 en Copyright 2019 Andy K. Yoon Electric airplane, electric machine, high frequency, slotless, litz, halbach, aerospace, high specific power, high power density, flight weight High-frequency, slotless permanent magnet synchronous motor for aircraft propulsion text text Electrical & Computer Eng Electrical & Computer Engr University of Illinois at Urbana-Champaign Dissertation Ph.D.