2026-09-21T22:41:42Z https://www.ideals.illinois.edu/oai-pmh

oai:www.ideals.illinois.edu:2142/19741 2023-07-10 col_2142_5131 col_2142_8888 com_2142_5130 com_2142_8887 com_2142_234

Lo, Yuen T. Gilbert, Roland Arthur 2011-05-07T12:17:04Z 2011-05-07T12:17:04Z 10000-01-01 1990 Cavity-backed slot antennas are experiencing a revival because of the ever-increasing need for low-profile and conformal antennas which have a low radar cross section out of their operating frequency bands. Like thin microstrip patch antennas, cavity-backed slot antennas typically have a narrow impedance bandwidth of 1 to 6 percent of center frequency, which limits their usage. A new method of feeding a thin cavity slot antenna with a stripline leading to a T-bar, which lies beneath or in the slot, greatly enhances the impedance bandwidth over a range of 10 to 30 percent depending on the slot width. In the past, the design parameters for the T-fed slot antenna were obtained empirically. A computer model is developed in this thesis to provide a vehicle for analyzing the antenna's performance prior to fabrication. Since the antenna cavity is thin, there is a complex interaction between the T-bar, slot, stripline feed, and modes of the cavity. In the antenna model, all of the cavity apertures are closed with a perfect conductor, and the fields there and on the T-bar are replaced with equivalent currents. The analysis is simplified by the superposition principle to obtain the total fields in the cavity by summing all the fields produced independently by each equivalent current source in the closed cavity. A method of moments approach is used to find the coefficients of the unknown equivalent sources by matching the fields in the cavity and the stripline to the appropriate boundary conditions. From these values the impedance of the antenna is determined. To verify the model, T-fed slot antennas were fabricated and measured at X-band and S-band. The calculated and measured values are compared. Made available in DSpace on 2011-05-07T12:17:04Z (GMT). No. of bitstreams: 2 license.txt: 4922 bytes, checksum: 910b249b4beec47e7ab768910c8f966f (MD5) 9021685.pdf: 4652008 bytes, checksum: 8d8555d0d900a3263a3221857d25e81b (MD5) Previous issue date: 1990 Item marked as restricted to the 'UIUC Users [automated]' Group (id=2) by Howard Ding (hding2@illinois.edu) on 2011-05-07T14:39:07Z Item is restricted indefinitely. Restriction data tranferred 2014-07-01T11:16:24-05:00 Original Data Group with Access UIUC Users [automated] Release Date: none Reason: ETDs are only available to UIUC Users without author permission ETDs are only available to UIUC Users without author permission U of I Only AAI9021685 (UMI)AAI9021685 http://hdl.handle.net/2142/19741 eng Copyright 1990 Gilbert, Roland Arthur Engineering, Electronics and Electrical Cavity-backed T-fed slot antenna text Electrical and Computer Engineering Electrical Engineering University of Illinois at Urbana-Champaign Dissertation Ph.D.