2026-09-21T13:00:23Z https://www.ideals.illinois.edu/oai-pmh

oai:www.ideals.illinois.edu:2142/72621 2023-07-11 col_2142_5131 col_2142_46414 com_2142_5130 com_2142_178 com_2142_234

Socie, Darrell F. Barkey, Mark Edward 2014-12-17T23:51:45Z 2014-12-17T23:51:45Z 10000-01-01 1993 1993 An approximate analytical method is developed to calculate strains at stress concentrators in structures of elastic-plastic, isotropic material subjected to proportional and nonproportional multiaxial nominal loading. The method uses anisotropic plasticity theory to define a structural yield surface in nominal stress space that incorporates both the isotopic material properties and the anisotropic geometry factors of the notch, and accounts for varying degrees of constrained plastic flow at the stress concentrator. Plastic strain increments at the stress concentrator and anisotropic work-hardening effects are then related to this yield surface using standard methods of plasticity. The method is applied to mildly and sharply notched shafts, and a plate with a central through hole subjected to proportional and nonproportional nominal loading. The results of these calculations are compared with experimental results of a mildly notched shaft subjected to combined tensile and torsional load, and with extensive finite element analyses of all of the structures. The strain calculations agree well with both qualitatively and quantitatively with the experiments and finite element calculations when using an appropriate uniaxial load-notch plastic strain relationship, and are suitable for strain-life fatigue calculations. Made available in DSpace on 2014-12-17T23:51:45Z (GMT). No. of bitstreams: 1 9411562.pdf: 4564485 bytes, checksum: 2e36908c3c0be3b5431d8e7c270d9461 (MD5) Previous issue date: 1993 Embargo set by: Seth Robbins for item 72789 Lift date: Forever Reason: Restricted to the U of I community idenfinitely during batch ingest of legacy ETDs Restricted to the U of I community idenfinitely during batch ingest of legacy ETDs U of I Only 214 p. Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 1993. http://hdl.handle.net/2142/72621 (UMI)AAI9411562 Applied Mechanics Engineering, Mechanical Calculation of Notch Strains Under Multiaxial Nominal Loading text Theoretical and Applied Mechanics Theoretical and Applied Mechanics University of Illinois at Urbana-Champaign Dissertation Ph.D.