2026-09-22T17:26:50Z https://www.ideals.illinois.edu/oai-pmh

oai:www.ideals.illinois.edu:2142/83332 2023-07-11 col_2142_5131 col_2142_14770 com_2142_5130 com_2142_3518 com_2142_234

Garcia, Marcelo H. Yang, Xuejun 2015-09-25T21:04:20Z 2015-09-25T21:04:20Z 10000-01-01 2007 2007 Prototype-scale hydrodynamic modelings were first conducted to evaluate the structure design of the Calumet High-Level Influent Pumping Station (CHLIPS). The complex geometries were discretized into unstructured tetrahedral meshes. A FEM flow solver was used with the k-epsilon model as the turbulence closure. The rigid-lid assumption was employed to simplify the modeling of the water surface. The MPI parallization of the code and the utilization of high-performance supercomputers made the resulting intensive computation feasible. The flow in CHLIPS's pump forebay was first evaluated to identify undesirable flow behaviors which could endanger the station's normal operation. Geometrical modifications were correspondingly recommended to improve the design. The modeling for the entire CHLIPS structure was then focused on evaluating the balance of flow distribution among the screen channels and the wet wells. The flow solver was further enhanced to provide the capability of capturing oscillating free surfaces. Level set method was coupled with the k-epsilon model to track the evolution of the water surface. Numerical algorithms were devised to deal with problems caused by the significant differences in fluid properties between water and air. The model was finally applied to study the flow in the pump forebay of the CHLIPS physical model. A comparison between numerical results and experimental measurements shows the flow characteristics are satisfactorily predicted by the model. Made available in DSpace on 2015-09-25T21:04:20Z (GMT). No. of bitstreams: 2 license.txt: 4848 bytes, checksum: 96035ab3f5e1c23cc7138a224ce498bd (MD5) 3270057.pdf: 3758114 bytes, checksum: 95fe2824b0d8140a1a8e682ce7331a22 (MD5) Previous issue date: 2007 Embargo set by: Seth Robbins for item 84613 Lift date: Forever Reason: Restricted to the U of I community idenfinitely during batch ingest of legacy ETDs Restricted to the U of I community idenfinitely during batch ingest of legacy ETDs U of I Only 108 p. Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 2007. http://hdl.handle.net/2142/83332 (MiAaPQ)AAI3270057 eng Engineering, Civil 3D Numerical Modeling of the Turbulent Flow in Hydraulic Structures text Civil Engineering Civil Engineering University of Illinois at Urbana-Champaign Dissertation Ph.D.