Effects of Prior Ductile Tearing on Cleavage Fracture Toughness in the Transition Region

Dodds, Robert H., Jr.; Tang, M.; Anderson, T.L.

Permalink

https://hdl.handle.net/2142/14202 Copy

Description

Title

Effects of Prior Ductile Tearing on Cleavage Fracture Toughness in the Transition Region

Author(s)

• Dodds, Robert H., Jr.
• Tang, M.
• Anderson, T.L.

Issue Date

1993-11

Keyword(s)

• Fracture mechanics
• Fracture toughness
• Micromechanics
• finite elements

Abstract

"Experimental studies demonstrate a significant effect of specimen size, a/W ratio and prior ductile tearing on cleavage fracture toughness values (Jc ) measured in the ductile-to-brittle transition region of ferritic materials. In the lower-transition region, cleavage fracture often occurs under conditions of large-scale yielding but without prior ductile crack extension. The increased toughness develops when plastic zones formed at the crack tip interact with nearby specimen surfaces which relaxes crack-tip constraint (stress triaxiality). In the mid-to-upper transition region, small amounts of ductile crack extension (often < 1-2 mm) routinely precede termination of the J-fla curve by brittle fracture. Large-scale yielding, coupled with small amounts of ductile tearing, magnifies the impact of small variations in microscale material properties on the macroscopic fracture toughness which contributes to the large amount scatter observed in measured Jc-values.Previous work by the authors described a micromechanics fracture model to correct measured Jc-values for the mechanistic effects of large-scale yielding. This new work extends the model to also include the influence of ductile crack extension prior to cleavage. Ductile crack extensions of 10-15 x the crack-tip opening displacement at initiation are considered in plane-strain, finite element computations. The finite element results demonstrate a significant elevation in crack-tip constraint due to macroscopic ""sharpening"" of the extending tip relative to the blunt tip at initiation of growth. However, this effect is offset partially by the additional plastic deformation associated with the increased applied J required to grow the crack. The initial a / W ratio, tearing modulus, strain hardening exponent and specimen size interact in a complex manner to define the evolving near-tip conditions for cleavage fracture. The paper explores development of the new model, provides necessary graphs and procedures for its application and demonstrates the effects of the model on fracture data sets for two pressure vessel steels (A533B and A515)."

Publisher

University of Illinois Engineering Experiment Station. College of Engineering. University of Illinois at Urbana-Champaign.

Series/Report Name or Number

Civil Engineering Studies SRS-583

Type of Resource

text

Language

en

Permalink

http://hdl.handle.net/2142/14202

Sponsor(s)/Grant Number(s)

• U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering.
• Edison Welding Institute Cooperative Research Program
• Contract No. N00167-92-K-0038

Owning Collections