University of Illinois Urbana-Champaign

Capacity and Efficiency in Variable Speed, Vapor Injection and Multi-Compressor Systems

Jain, S.; Bullard, C.W.

Measurement of wall relaxation times of polarized 3He in bulk liquid 4He for the Neutron Electric Dipole Moment experiment

Yoder, Jacob

Falling film Ammonia Evaporators

Gonzalez G, J.M.; Jabardo, J.M.S.; Stoecker, W.F.

Geothermal Heat Recovery Complex: Large-Scale, Deep Direct-Use System in a Low-Temperature Sedimentary Basin

Lin, Y.F.; Stumpf, A.; Frailey, S.; Okwen, R.; Lu, Y.; Holcomb, F.; Tinjum, J.; Stark, T.; Damico, J.; Elrick, S.; Fisher, K.; Fu, W.; Garner, D.; Hammock, C.; Kirksey, J.; Korose, C.; Lin, J.; Lin, Z.; McKaskle, R.; Nelson, J.; Salih, H.; Thomas, L.; Urlaub, J.; Vance, A.; Yang, F.

Steam condensation in flattened-tube air-cooled condensers

Davies III, William Allen

Including Material Cost and Strength Constraints in Heat Exchanger Design

Davidson, I.E.; Bullard, C.W.

The effect of surface wettability on frost growth and densification on flat plates

El Cheikh, Amne

Development and Validation of a Room Air Conditioning Simulation Model

Mullen, C.E.; Bridges, B.D.; Porter, K.J.; Hahn, Gregory William; Bullard, C.W.

Design and Performance of CO2 Injection Equipment: MGSC Sugar Creek and Mumford Hills Enhanced Oil Recovery Pilot Sites

McKaskle, Ray W.; Sexton, Andrew

Modeling of the Evaporation and Condensation of Zeotropic Refrigerant Mixtures in Horizontal Annular Flow

Hurlburt, E.T.

Irregularities in braking power of freight cars : with special reference to wheel service

Vial, Frederick Ketchum

The Interaction Between the Substrate and Frost Layer Through Condensate Distribution

Hoke, J.L.; Georgiadis, J.G.; Jacobi, A.M.

Condensation of Ozone-Safe Refrigerants in Horizontal Tubes: Experimental Test Facility and Preliminary Results

Bonhomme, D.M.

Two-Phase Pressure Drop and Flow Regime of Refrigerants and Refrigerant -Oil Mixtures in Small Channels

Field, Brandon S.

Wettability on nanoparticle modified surface: for thermal engineering

Zhang, Feini

The Heat Transfer and Pressure Drop Behavior of a Zeotropic Refrigerant Mixture in a Microfinned Tube

Sweeney, K.A.; Chato, J.C.

Wetting and frosting/defrosting study on microgrooved surfaces

Rahman, Md

The Effect of Frosting on the Performance of Domestic Refrigerator-Freezer Finned Tube Evaporator Coils

Rite, R.W.

Numerical Study of Flow and Heat Transfer in Wavy Passages

Stone, K.M.; Vanka, S.P.

Flow of brine in pipes

Gould, Richard Ernest; Levy, Marion I.

Modeling of an Automotive Air Conditioning Compressor Based on Experimental Data

Darr, J.H.

The Midwestern brewery before Prohibition: Development of an American industrial building type

Appel, Susan Kay Bigley

Dehumidification Effect by Coupling an Electroosmotic Material With a Desiccant Interface

Mina, Ehab Mouris

Modeling of the Evaporation and Condensation of Zeotropic Refrigerant Mixtures in Horizontal Annular Flow

Hurlburt, Evan Timothy

Quality and Chemical Changes of Green Beans Stored in Refrigerated Modified Atmospheres

Groeschel, Edward Clarence, Jr.

Use of Nano-Indentation and Nano-Scratch Techniques to Investigate Near Surface Material Properties Associated With Scuffing of Engineering Surfaces

Pergande, S.R.; Polycarpou, Andreas A.; Conry, T.F.

The Mesoscopic Peristaltic Compressor

Sulfridge, M.A.; Miller, N.R.

Phase change phenomena on water repelling and biphilic surfaces

Chavan, Shreyas Atmaram

Experimental, Analytical and Finite Element Studies of the Nanoindentation Technique to Investigate Material Properties of Surface Layers Less Than 100 Nanometers Thick

Yu, N.; Polycarpou, Andreas A.; Conry, T.F.

Electric power for the farm

Lehmann, Emil Wilhelm; Kingsley, Frank C.